Xylem Cond 1970i - Manual (Page 49)

Cond 1970i Operation
49 ba75692e01 01/2007
4.8 Reset
You can reset (initialize) the measurement parameters and the config-
uration parameters separately from one another.
Measurement
parameters
The following measured parameters ( InI) are reset to the default
condition:
Note
The calibration data gets lost when the measuring parameters are re-
set. Recalibrate after performing a reset.
Configuration
parameters
The following configuration parameters (InI) are reset to the delivery
status:
Measuring mode
Cell constant 0.475 cm
-1
(calibrated)
0.475 cm
-1
(set up)
Temperature compensation nLF
Reference temperature 25 °C (TREF25)
Temperature coefficient of the lin-
ear temperature compensation 2.000 %/K
TDS factor 1.00
Baud rate 4800
Interval 1
(automatic saving)
OFF
Interval 2
(for data transmission)
OFF