Xylem Cond 1970i - Manual (Page 11)

Cond 1970i Commissioning
11 ba75692e01 01/2007
3 Commissioning
3.1 Scope of delivery
z Portable measuring instrument, Cond 1970i with integrated re-
chargeable battery
z Carrying and positioning handle
z Carrying strap
z Sensor quiver
z Plug-in power supply unit
z Operating manual
3.2 Power supply
Mains operation and
charging the battery
You can either operate the measuring instrument with the integrated re-
chargeable battery or with the plug-in power supply. The plug-in power
supply supplies the measuring instrument with low voltage (12 V DC).
At the same time, the rechargeable battery is charged.
Charging time of the
battery
approx. 16 hours. The battery is charged even when the instrument is
switched off. The LoBat display indicator appears when the battery is
nearly empty and has to be charged as soon as possible.
Warning
The line voltage at the operating site must lie within the input voltage
range of the original plug-in power supply (see chapter 7 T
ECHNICAL DA -
TA ).
Warning
Use original plug-in power supplies only (see
chapter 7 T
ECHNICAL DATA ).