YSI IQ S ENSOR N ET TriOxmatic 700 IQ (SW) - Manual (Page 38)

Maintenance, cleaning, disposal, and replacement TriOxmatic
®
700 IQ (SW)
5 - 16 ba76013e01 01/2012
10 Rinse the sensor head and electrode unit several times with
deionized water.
11 Water the sensor head and electrode unit in deionized water
for at least an hour.
12 Carefully shake off the drops of water.
13 Fill a new WP 600 membrane cap and screw it on (see section
5.3 C
HANGING THE ELECTROLYTE AND MEMBRANE CAP ).
14 Connect the sensor to the sensor connection cable.
15 After approx. 60 minutes, the sensor is ready for operation.