YSI IQ S ENSOR N ET Field bus linking - Manual (Page 6)

Linking the IQ S ENSOR N ET to a field bus IQ S ENSOR N ET Field bus linking
4 ba76148e01 06/2013
1.2 Linking the IQ S
ENSOR
N
ET
1.2.1 Linking the IQ S ENSOR N ET via the RS485 interface
* Configuring the order of the sensors in the IQ S ENSOR N ET (see sec-
tion 3.6)
1.2.2 Linking the IQ S
ENSOR
N
ET
via the Ethernet interface
* Configuring the order of the sensors in the IQ S
ENSOR
N
ET
(see sec-
tion 3.6)
Steps Profibus Modbus
1 Establish the physical connection section 2.1
2 Configure the interface of the
IQ S
ENSOR N ET
section 3.1 section 3.2
3 Program the queries and access
authorization * section 4.1 section 4.2
GSD file
section 3.1.2
4 Interpret the data of the
IQ S
ENSOR N ET
section 5 ff
Steps Ethernet IP Profinet Modbus TCP
1 Establish the physical connection section 2.2
2 Configure the interface of the
IQ S
ENSOR N ET
section 3.4
3 Program the queries and access
authorization * section 4.1 section 4.2
EDS file
section
3.4.2
GSD file
section
3.4.1
4 Interpret the data of the
IQ S
ENSOR N ET
section 5 ff