YSI IQ S ENSOR N ET Field bus linking - Manual (Page 18)

Configuring the IQ S ENSOR N ET IQ S ENSOR N ET Field bus linking
16 ba76148e01 06/2013
3.4 Configuring the IQ S
ENSOR
N
ET
for Ethernet field
buses
3.4.1 GSD file for Profinet
The GSD file contains all necessary information on the Profinet module
and is required by the configuration program for the Profinet master.
The current GSD file is provided on the Internet under www.WTW.com.
3.4.2 EDS file for Ethernet-IP
The EDS file contains information on the Ethernet-IP module. It is eval-
uated by some configuration programs.
The current EDS file is provided on the Internet under www.WTW.com.
Setting Selection/Values Explanation
DHCP Yes The IQ S ENSOR N ET is configured as a DHCP
client.
If a DHCP server is in the network, the
IQ S
ENSOR N ET receives all other network
settings from the DHCP server.
No The IQ S ENSOR N ET is not configured as a
DHCP client.
All other settings have to be done as required.
IP address Address Permanent IP address for the IQ S
ENSOR
N
ET
in
the LAN (if DHCP No).
Subnet mask Address Subnet mask (if DHCP No).
The subnet mask depends on the network size
(for small networks: e.g. 255.255.255.0).
DNS server Address Entry for field bus not required.
For a connection with the Internet (if DHCP No),
e.g.:

IP address of the DNS server in the network
 Entry of IP address or e.g. 127.0.0.1
Standard gateway Address Entry for field bus not required.
For a connection with the Internet (if DHCP No),
e.g.:

IP address of the instrument establishing the
access to the Internet
 Entry of IP address or e.g. 127.0.0.1