YSI IQ S ENSOR N ET Field bus linking - Manual (Page 15)

IQ S ENSOR N ET Field bus linking Configuring the IQ S ENSOR N ET
13 ba76148e01 06/2013
3.2 Configuring the IQ S
ENSOR
N
ET
for Modbus RTU
3.2.1 Setting the Modbus interface parameters
Opening the setting
menu for Modbus RTU
Settings
1 Open the setting menu with .
2 For MIQ/MC2:
Press <> and to select and confirm the menu
item, Settings of bus interfaces
3 Select and confirm the bus interface with <> and
.
Setting Selection/Values Explanation
Device Address 1 ... 247 Instrument address
of the
IQ S
ENSOR N ET in
the Modbus RTU
Baud rate 1200
2400
4800
9600
19200
38400
57600 Baud rate
Parity None
Even
Odd Parity
None
(2 stop bits)
Even
(1 stop bit)
Odd
(1 stop bit)
4 Edit the settings.
To accept all settings, you have to highlight the Save and
quit menu item at the lower end of the setting table and to
confirm with . If you exit the setting table via ,
/Quit or the Quit menu item, all changes are
ignored.