Xylem HandyLab 780 - Manual (Page 71)

71
pH Oxy Cond
Data Logger
Increasing the Battery Life
To increase the battery life for logger operation, the time for the display ligh-
ting selected in the confi guration should be as short as possible.
Note
: When the selected time has expired, display and backlighting switch
off automatically. They can be switched on again by pressing any key.
Confi guring the Data Logger
Prerequisite: Data logger is stopped.
The “Data logger” menu shows the number of occupied entries as well as the
number of free entries. Confi guration can also be done in the “Confi guration”
menu under “Data logger”.
1) Press Menu softkey.
2) Select “Data logger” and confi rm by pressing enter.
3) Select “Confi gure data logger” and confi rm by pressing enter.
4) Confi gure data logger as required (see table).
5) When you have completed the confi guration, you can start the data log-
ger!