C2G 29505 WIRELESS DIGITAL SIGNAGE DISTRIBUTION SYSTEM User Manual
Page 25
24
To create a network using the wireless LAN, you must be familiar with the features of the
antenna that came with this product. Also, you need to install this product to the network
with better radio performance
TIP
• When you use this product outside, be sure to comply with the radio regulations in the country. The
wireless channels or communication mode that can be used outside will differ depending on each
country.
A
BOUT THE
A
NTENNA
The antenna that came with this product is a non-directional antenna (omni antenna).
TIP
• The appropriate distance between the antennas will differ depending on the radio status. Adjust the
distance after you install and run this product in actual locations.
• If you have issues with getting a picture on the receiver and obstructive objects are between it and
the transmitter, try moving the receiver within line of sight of the transmitter. Diagrams on the next
page will help in explaining product location using line-of-sight.
• If you continue to have issues with getting a clear image and have tried the above, please contact us
to discuss different options of antennas that you may be able to try
3.4
I
NSTALL THIS
P
RODUCT