C2G 29505 WIRELESS DIGITAL SIGNAGE DISTRIBUTION SYSTEM - Manual (Page 11)

10
R
ECEIVER
F RONT
LED Definition
POWER OFF: Powered off or being on boot process.
ON: Powered on (Normal status)
STATUS Blink: Blinks for each codec of 1 video frame.
ON: Factory default configuration using push buttons is complete.
WIRELESS OFF: Wireless communication is disabled.
Blink:: Wireless communication is not established. (Detecting AP or other nodes, or unable to
connect due to the mismatch of wireless settings).
ON: Wireless communication is established.
ETHER
OFF: Not connected to wired LAN (Not linked)
ON: Connected to wired LAN (Being linked)
Push button Action
MENU Shows the OSD menu.
(In the OSD) Returns to top menu from status/configuration menu.
Starts a factory default configuration when this button and [SET] button are pushed together while
turning on this product..
- (In the OSD) Goes back to previous option.
+ (In the OSD) Goes on to next option.
SET
(In the OSD) Determines the menu items and options.
Starts a factory default configuration when this button and [MENU] button are pushed together while
turning on this product.
2.2 P
ARTS AND
F
UNCTION