C2G 29505 WIRELESS DIGITAL SIGNAGE DISTRIBUTION SYSTEM - Manual (Page 18)

17
When the cable connections and power on are completed, configure the network settings
and adjust the screen images for the Transmitter and Receiver from the PC.
A SSIGN IP A DDRESS
To simplify the network configuration, the Transmitter and Receiver support the auto IP
configuration. By default, they attempt to load an IP address via DHCP when powered on.
If no DHCP server is found, then the Transmitter and each of the Receivers are loaded with
a random IP address of 169.254.xxx.xxx. (Note that the same IP address may be used
twice if both wireless and wired network are used.)
If you prefer, you can use the WDSDS Locator to manually assign an IP address for
WDSDS Transmitter and Receiver.
1. First assign a static IP address to the PC that you are using for setup. (Example:
10.10.10.10)
2. When you run the WDSDS Locator program, a list of the available WDSDS
Transmitters and Receivers will appear on the main screen.
3. Select the Transmitter or Receiver that you wish to configure. From the top menu,
click NodeÆSet IP Address.
4. Configure a unique IP address that is not used by other network devices and click
OK. (Example: 10.3.0.1)
5. Repeat the same process and enter a unique IP address into each Transmitter and
Receiver.
3.3 P
RODUCT
C
ONFIGURATION