Assignable controller list – AVSL 169.011-169.013 MU-series MIDI/USB Keyboard Controllers User Manual
Page 6
PEDAL POLARITY (MU49, MU61)
Different switch or expression pedals may vary in the switching polarity. If the switch is on when it should be off and vice versa,
the switch can be reversed by pressing EDIT and PA POLARITY or PA POLARITY
Use the DATA +/- to select the required polarity for PA (pedal A) or PB (pedal B)
ALL SOUND OFF (MU49, MU61)
Pressing the EDIT button then the ALL SOUND OFF key transmits a message to kill sound output.
The All Sound Off (controller 120) is useful if software crashes or a sound module “sticks” in play mode
ALL NOTE OFF
Pressing the EDIT button then the ALL NOTE OFF key transmits all MIDI notes off (controller 123)
This can be useful if a MIDI device or software “freezes” with notes stuck in a play state.
RESET ALL CONTROLLERS
Pressing the EDIT button then the RESET ALL CTRL key transmits MIDI reset message (controller 121)
This returns all controller values to their default settings
GM/GS/XG ON (MU25)
Pressing the EDIT button then the GM/GS/XG ON key transmits the GM/GS/XG initialisation messages
This sets any or all 3 standards on for any GM, GS or XG devices being controlled by the keyboard
GM ON (MU49, MU61)
Pressing the EDIT button then the GM ON key transmits the GM initialisation message
This switches on the General MIDI sound-set for compatible equipment controlled by the keyboard
(message = F0 7E 7F 09 01 F7)
GM2 ON (MU49, MU61)
Pressing the EDIT button then the GM2 ON key transmits the GM2 initialisation message
This switches on the General MIDI 2 sound-set for compatible equipment controlled by the keyboard
(message = F0 7E 7F 09 03 F7)
GS ON (MU49, MU61)
Pressing the EDIT button then the GS ON key transmits the GS initialisation message
This switches on the General Standard sound-set for compatible equipment
(message = F0 41 10 42 12 40 00 7F 00 41 F7)
XG ON (MU49, MU61)
Pressing the EDIT button then the XG ON key transmits the XG initialisation message
This switches on the eXtended General MIDI sound-set for compatible equipment
(message = F0 43 10 4C 00 00 7E 00 F7)
PRESET (MU49, MU61)
Pressing the EDIT button then the PRESET key returns the keyboard back to factory preset program
CLEAN (MU49, MU61)
When using number keys (0-9) to enter numbers, pressing the CLEAN key sets the number to 0
RESET (MU49, MU61)
When using DATA+/- keys to enter values, pressing the DATA+ and DATA- buttons simultaneously sets the number to
1: ASSIGNABLE CONTROLLER LIST
NO.
ITEM
INITIAL CHANNEL
PARAMTER RANGE
INITIAL PARAMETER
INITIAL PARAMETER VALUE
1
Data +/-
0
0 - 159
154
0
2
Slider
0
0 - 147
147
0
3
Wheel P
0
0 - 147
146
64
4
Wheel M
0
0 - 147
1
0
5
Pedal A
0
0 - 151
64
0
6
Pedal B
0
0 - 151
67
0
7
R1
0
0 - 159
152
0
8
R2
0
0 - 159
153
0
9
R3
0
0 - 159
156
100
10
R4
0
0 - 159
157
0
11
R5
0
0 - 159
7
100
12
R6
1
0 - 159
7
100
13
R7
2
0 - 159
7
100
14
R8
3
0 - 159
7
100