AVSL 169.011-169.013 MU-series MIDI/USB Keyboard Controllers - Manual (Page 5)

TRANSPOSE (MIDI control number 155)
When DATA +/- is assigned as TRANSPOSE, DATA +/- can be used to shift the pitch +/- 12 semitones
Press both DATA + and - simultaneously to set the program to the initial value = 0
Likewise, the dials (R1-R4 or R5-R8) can be assigned to set the TRANSPOSE
OCTAVE (MIDI control number 154)
When DATA +/- is assigned as OCTAVE, DATA +/- can be used to shift the pitch +/- 3 octaves
Press both DATA + and - simultaneously to set the program to the initial value = 0
Likewise, the dials (R1-R4 or R5-R8) can be assigned to set the OCTAVE
DUAL
Press the EDIT button and the EDIT LED will be light to indicate that the note keys are in EDIT mode.
Press the DUAL key to enter dual layer mode, the layered program can be set as per PROGRAM above
DUAL function overrides the SPLIT function (details below)
Pressing EDIT and the DUAL key cancels this function
SPLIT (MU49, MU61)
Press the EDIT button and the EDIT LED will be light to indicate that the note keys are in EDIT mode.
Press the SPLIT key to enter split keyboard mode,
SPLIT function cannot be used at the same time as DUAL function
Pressing EDIT and the SPLIT key cancels this function
SPLIT POINT
Press the EDIT button followed by the SPLIT POINT key to select the keyboard split point.
The LED display will show CHO, prompting the user to
“choose” the controller that needs to be assigned.
Press the key at the desired split point and the 2 keyboard zones will be set.
MTC
Pressing the EDIT button followed by the MTC key sets MIDI Time Code (F8) to be transmitted from the keyboard to the device it
is controlling or to the computer it is attached to. Pressing EDIT and MTC again switches this function off again.
Active Sensing (MU49, MU61)
Pressing the EDIT button followed by the ACT key sets Active Sensing (FE) to be transmitted from the keyboard to the device it
is controlling or to the computer it is attached to. Pressing EDIT and ACT again switches this function off again.
LOCK (MU49, MU61)
Press the EDIT button followed by the LOCK key to lock ou
t the keyboard’s controllers.
In this mode, the keyboard is active but all other controllers are deactivated.
Pressing EDIT and LOCK again cancels this function.
MUTE
Press the EDIT button followed by the LOCK key to stop the MIDI output signal from the keyboard.
Pressing EDIT and MUTE again cancels this function.
SNAP SHOT
Press the EDIT button followed by the SNAPSHOT key to send a controller snapshot.
This transmits all current controller values (PITCH/MOD/SLIDER/ROTARIES) over MIDI simultaneously.
UPLOAD/DOWNLOAD
The user settings stored in the MU-series keyboard can be stored to and re-called from a computer connected to it via USB.
These settings are transmitted as a SYSEX (SYStem EXclusive) file, which can be recorded into a software MIDI sequencer.
Different software packages may vary in the way these are stored and handled. Please refer to the help files in the particular
software package for information on how to store SYSEX information from an external MIDI device.
Set the MIDI software package to receive or record SYSEX data
Press EDIT then UPLOAD
The LED display will show
“SEu” to indicate uploading and then “don” to indicate complete
To receive stored SYSEX data from the computer, prepare the software to play back the SYSEX file.
Press EDIT then DOWNLOAD and play the file back from the MIDI software package.
The LED display will show “SEd” to indicate downloading and then “don” to indicate complete