AVSL Citronic DSM2-6 - Manual (Page 6)

6 170.660UK User Manual
5. Press the encoder to select the input to switch on or off and rotate encoder to select
6. Press the encoder to confirm value and rotate encoder to move over to next input
5. Press the encoder to select the input to switch on or off and rotate encoder to select
2. Output Limiter setting:
[Parameter] Dynamic limiter (independent for each channel)
Threshold -20dB to +20dB Attack 0.3 to 100ms Release 2/4/6/8/16/32x
example: 1. Hold OUT 1 MUTE/EDIT button 3secs for edit mode (green LED lit)
2. Press LIMITER and the display will show as below
3. Turn encoder clockwise to adjust the Thresh value
4. Press the encoder to confirm value, switch to Attack and rotate encoder to adjust
4. Press the encoder to confirm value, switch to Release and rotate encoder to adjust
*Release value (2/4/6/8/16/32x) relates to multiple of Attack time
3. Outut Polarity setting:
[Parameter] Polarity [+] positive [-] negative (independent for each channel)
example: 1. Hold OUT 1 MUTE/EDIT button 3secs for edit mode (green LED lit)
2. Press POLARITY and the display will show as below
3. Turn encoder to change polarity
4. Output Delay setting:
[Parameter] Delay 0 - 1000ms (independent for each channel)
21μs steps 0 - 10ms, 84μs steps 10-20ms, 0.5ms steps over 20ms
example: 1. Hold OUT 1 MUTE/EDIT button 3secs for edit mode (green LED lit)
2. Press DELAY and the display will show as below
3. Turn encoder to change the time value