AVSL Citronic DSM2-6 - Manual (Page 5)

5 170.660UK User Manual
3. Parametric EQ setting:
[Parameter] Input EQ1 – EQ6 (6 independent EQs for each channel)
Frequency 20Hz - 20kHz Gain -20 - +20dB Bandwidth 0.05Oct - 3Oct
example: 1. Hold IN A MUTE/EDIT button 3secs for edit mode (green LED lit)
2. Press EQ and the display will show as below
3. Turn encoder clockwise to open the Freq setting and adjust value
4. Press the encoder to confirm value and rotate encoder to move over to Gain
5. Press the encoder to confirm Gain and rotate encoder to adjust the value
6. Press the encoder to confirm value and rotate encoder to move over to Bandwidth
7. Press the encoder to confirm Bandwidth and rotate encoder to adjust the value
A short press of the EQ function button switches through EQ1 to EQ6 to set each EQ Press and hold
MUTE/EDIT key of other channels to repeat process for each in turn
Output Parameter setting
Press & hold the MUTE/EDIT key for OUT 1 to OUT 6 for 3 seconds to enter edit mode.
Pressing a function button edits that particular function for the channel being edited.
Turning the rotary encoder adjusts the current selected parameter.
Pressing the rotary encoder enters the value for that field.
Further turning of the encoder navigates to other parameters within the function.
Pressing other function buttons switches to those other functions instantly.
1. Output Gain setting:
[Parameter] Gain -12dB to +12dB in 0.1dB steps
Select either or both inputs to the output channel
example: 1. Hold OUT 1 MUTE/EDIT button 3secs for edit mode (green LED lit)
2. Press GAIN and the display will show as below
3. Turn encoder clockwise to adjust the Gain value
4. Press the encoder to confirm value and rotate encoder to move over to input select