AVSL 130.035 AMS SERIES - Manual (Page 4)

130.034UK, 130.035UK User Manual
Distribution of satellite signal:
The diagram above shows how the analogue signal from a satellite receiver can be distributed.
Because the AMS series amplifier is designed with DC pass, all 4 TV’s can be set up with “Magic eye”
remote extension units, which allow remote control of the satellite receiver. This is achieved by
connecting the RF2 output of the satellite receiver to the input of the amplifier.
Please note: only one satellite channel can be viewed at any particular time from the satellite receiver.
AMS series amplifiers do not require setup to operate, for satellite receiver set up please refer to your
satellite receiver manual.