Armasight TFT263BN0BHSXRP FLIR BHS-XR Command 640x480 Thermal Bi-ocular, no lens 30Hz, PAL - Manual (Page 9)

BHS-Series Bi-Ocular Operator’s Manual 1—Introduction
431-BHS0-00-10, Revision 110 3
1–2 Cautions
Do not disassemble the camera enclosure. Disassembly can
cause permanent damage and will void the warranty.
Keep the compartment covers closed to avoid exposing the
cameras electronics to water or debris.
Do not point the camera directly at extremely high-intensity
radiation sources, such as the sun, lasers, arc welders, etc.
Use only the supplied adapters to power or recharge the camera.
Be careful not to leave fingerprints on the camera’s optics.
Always keep the camera window covered. A lens or the lens cover
should always be installed on the camera to protect the window.
Caution!
Always keep the camera window covered. A lens or the lens cover
should always be installed on the camera to protect the window.
431-BHS0-01-10 BHS-Series Operators Manual.book Page 3 Friday, April 6, 2012 1:16 PM