Sd card capacity and type, Installing an sd card, Downloading stored files via usb – Armasight TFT263BN0BHSXRP FLIR BHS-XR Command 640x480 Thermal Bi-ocular, no lens 30Hz, PAL User Manual
Page 27

BHS-Series Bi-Ocular Operator’s Manual
3—Operating Your Camera
431-BHS0-00-10, Revision 110
21
SD Card Capacity and Type
The BHS-Series Bi-Ocular camera supports storing images and video
on standard 1-Gb and 2-Gb SD cards or up to 32-Gb on SDHC cards.
Installing an SD Card
To install an SD card, insert the card into the slot and press on the SD
card until its edge is nearly flush with the surface and release.
To remove an SD card, use this same motion.
Downloading Stored Files via USB
The BHS-Series Bi-Ocular camera also supports downloading stored
images and video via the USB port.
With the camera on, plug the USB cable into the USB connector on
the camera and a USB port on your computer.
Allow up to two minutes for the USB connection to be recognized by
the computer’s operating system.
431-BHS0-01-10 BHS-Series Operators Manual.book Page 21 Friday, April 6, 2012 1:16 PM
- TFT263BN0BHSXRN FLIR BHS-XR Command 640x480 Thermal Bi-ocular, no lens 30Hz, NTSC TFT269BN0BHSXRP FLIR BHS-XR Command 640x480 Thermal Bi-ocular, no lens 9Hz, PAL TFT269BN0BHSXRN FLIR BHS-XR Command 640x480 Thermal Bi-ocular, no lens 9Hz, NTSC TFT233BN0BHSXP0 FLIR BHS-X Command 320x240 Thermal Bi-ocular, no lens 30Hz, PAL TFT233BN0BHSXN0 FLIR BHS-X Command 320x240 Thermal Bi-ocular, no lens 30Hz, NTSC TFT239BN0BHSXP0 FLIR BHS-X Command 320x240 Thermal Bi-ocular, no lens 9Hz, PAL TFT239BN0BHSXN0 FLIR BHS-X Command 320x240 Thermal Bi-ocular, no lens 9Hz, NTSC