3–2 installing the sd card, Installing the sd card – Armasight TFT263BN0BHSXRP FLIR BHS-XR Command 640x480 Thermal Bi-ocular, no lens 30Hz, PAL User Manual
Page 16
3—Operating Your Camera
BHS-Series Bi-Ocular Operator’s Manual
10
March 2012
3–2
Installing the SD Card
Install the SD card included with your camera package as follows:
1. Remove the small SD card door.
No tools are required.
2. Install the SD card into card
slot with label facing the
front of the camera.
3. Snap the SD card door back
into place, ensuring that
the rubber lanyard retracts
into the camera.
Grasp spring loaded buttons
on SD card door edges and pull
431-BHS0-01-10 BHS-Series Operators Manual.book Page 10 Friday, April 6, 2012 1:16 PM
This manual is related to the following products:
- TFT263BN0BHSXRN FLIR BHS-XR Command 640x480 Thermal Bi-ocular, no lens 30Hz, NTSC TFT269BN0BHSXRP FLIR BHS-XR Command 640x480 Thermal Bi-ocular, no lens 9Hz, PAL TFT269BN0BHSXRN FLIR BHS-XR Command 640x480 Thermal Bi-ocular, no lens 9Hz, NTSC TFT233BN0BHSXP0 FLIR BHS-X Command 320x240 Thermal Bi-ocular, no lens 30Hz, PAL TFT233BN0BHSXN0 FLIR BHS-X Command 320x240 Thermal Bi-ocular, no lens 30Hz, NTSC TFT239BN0BHSXP0 FLIR BHS-X Command 320x240 Thermal Bi-ocular, no lens 9Hz, PAL TFT239BN0BHSXN0 FLIR BHS-X Command 320x240 Thermal Bi-ocular, no lens 9Hz, NTSC