Armasight TFT263BN0BHSXRP FLIR BHS-XR Command 640x480 Thermal Bi-ocular, no lens 30Hz, PAL - Manual (Page 17)

BHS-Series Bi-Ocular Operator’s Manual 3—Operating Your Camera
431-BHS0-00-10, Revision 110 11
3–3 Installing the Batteries
The batteries must be installed and charged before using your
camera.
1. Pull off the battery cover by
lifting the latch as shown at
the right.
2. Install the batteries
paying attention to
the positive and
negative markings, as
shown at the right.
3. Re-install the battery
cover by engaging the
hinge and snapping
the latch back in
place.
If you have installed rechargeable batteries, they must be charged
before using the camera. Regular AA batteries may be used but will
only provide about one and a half hours of camera use.
Battery
cover
latch
431-BHS0-01-10 BHS-Series Operators Manual.book Page 11 Friday, April 6, 2012 1:16 PM