Asus P5GD2 Premium User Manual

Page 91

A S U S P 5 G D 2 P r e m i u m

4 - 2 1

The following item appears only when the AI Overclocking item is set to
[AI N.O.S.] or [Manual].

Memory Voltage [Auto]

Allows selection of the DDR SDRAM operating voltage. Set to Auto for safe
mode. Configuration options: [1.80V] [1.90V] [2.00V] [2.10V] [Auto]

FSB Termination Voltage [Auto]

Sets the Front Side Bus (FSB) termination voltage.
Configuration options: [1.20V] [1.40V] [Auto]

CPU Frequency [XXX] (value is auto-detected)

Indicates the frequency sent by the clock generator to the system bus and
PCI bus. The bus frequency (external frequency) multiplied by the bus
multiple equals the CPU speed. The value of this item is auto-detected by
BIOS. The values range from 100 to 400. Refer to the following table for
the correct Front Side Bus and CPU External Frequency settings. Use the
<+> and <-> keys to adjust the value.

Refer to the CPU documentation before setting the CPU VCore voltage.
A very high Vcore voltage can severely damage the CPU!

Chipset Core Voltage [Auto]

Allows selection of the chipset core voltage.
Configuration options: [1.50V] [1.60V] [Auto]

CPU VCore Voltage [Auto]

Allows selection of the CPU VCore voltage. The configuration options vary
depending on the CPU installed. Setting to Auto allows the BIOS to detect
the VCore voltage of the CPU installed.

Refer to the DDR2 documentation before setting the memory voltage.
Setting a very high memory voltage may damage the memory
module(s)!

Twin Turbo N.O.S. [Disabled]

Disables or sets a second overclocking threshold for the turbo non-delay
overclocking system. The configuration options vary depending on the
T u r b o N . O . S .

T u r b o N . O . S .

T u r b o N . O . S . item setting.