Asus P5GD2 Premium - Manual (Page 139)

A S U S P 5 G D 2 P r e m i u m A S U S P 5 G D 2 P r e m i u m A S U S P 5 G D 2 P r e m i u m A S U S P 5 G D 2 P r e m i u m A S U S P 5 G D 2 P r e m i u m 5 - 2 5 5 - 2 5 5 - 2 5 5 - 2 5 5 - 2 5
2. Select R A I D 1 R A I D 1 R A I D 1 R A I D 1 R A I D 1 then
press to
display the following.
MAIN MENU
Auto configuration
Manual configuration
c. The selection bar moves to
the Physical Drive menu.
Using the up or down arrow
keys, select a drive then
press to set the
first drive of the RAID set.
d. Repeat step c to set the second, third, and fourth drive. The
number of available drives depend on the installed and enabled
physical drives in the system.
e. The utility prompts a message to input the RAID size, use the up
or down arrow keys to set the RAID size then press .
f. Press to confirm or to return to the Main Menu.
T I P : T I P : T I P : T I P : T I P : For server systems, use of a lower array block size is
recommended. For multimedia computer systems used mainly for audio
and video editing, a higher array block size is recommended for optimum
performance.
PHYSICAL DRIVE
0 XXXXXXXXXXX XXXXXXMB
1 XXXXXXXXXXX XXXXXXMB
2 XXXXXXXXXXX XXXXXXMB
3 XXXXXXXXXXX XXXXXXMB
Creating a RAID 1 set (Mirrored) Creating a RAID 1 set (Mirrored) Creating a RAID 1 set (Mirrored) Creating a RAID 1 set (Mirrored) Creating a RAID 1 set (Mirrored)
To create a RAID 1 set:
1. From the Silicon Image
configuration utility
main menu, select
C r e a t e R A I D s e t
C r e a t e R A I D s e t C r e a t e R A I D s e t C r e a t e R A I D s e t C r e a t e R A I D s e t
then press . The
following sub-menu
appears.
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info RAID0
RAID1
RAID10
SPARE DRIVE
RAID0
RAID1
RAID5
RAID10
SPARE DRIVE
JBOD