beautypg.com

Asus Z87-A User Manual

Page 67

background image

Chapter 2: BIOS information

2-17

The following items appear only when you set the CPU Voltage Frequency to [Auto].

VRM Spread Spectrum [Disabled]
Enable the VRM Spread Spectrum to enhance system stability.

Configuration options: [Disabled] [�nabled]

Active Frequency Mode [Disabled]

Set this item to Enabled to help enhance the power saving condition while switching

frequencies. While a higher frequency makes the VRM transient response much faster,

switching frequenciesa affect the VRM thermal components.
Configuration options: [Disabled] [�nabled]

CPU Power Phase Control [Auto]

Allows you to set the power phase control of the CPU.
Configuration options: [Auto] [Standard] [Optimized] [�xtreme] [�anual Adjustment]

[Auto] [Standard] [Optimized] [�xtreme] [�anual Adjustment]

[Standard] [Optimized] [�xtreme] [�anual Adjustment]

[Manual Adjustment]

DO NOT remove the thermal module when setting this item to [Extreme]. The thermal

conditions should be monitored.

CPU Power Duty Control [T.Probe]

DIGI + VRM Duty Control adjusts the current of every VRM phase and the thermal conditions

of every phase component.
[T. Probe]

Select to maintain the VRM thermal balance.

[Extreme]

Select to maintain the current VRM balance.

DO NOT remove the thermal module. The thermal conditions should be monitored.

CPU Current Capability [Auto]

DIGI+ VRM CPU Current Capability provides wider total power range for overclocking.

A higher value setting gets higher VRM power consumption delivery and extends the

overclocking frequency range simultaneously.
Configuration options: [Auto] [1��%] [11�%] [12�%] [1��%] [14�%]

Choose a higher value when overclocking, or under a high CPU loading for extra power

support.

CPU Power Thermal Control [130]

A higher temperature brings a wider CPU power thermal range and extends the overclocking

tolerance to enlarge the O.C. potential. Use the <+> or <-> keys to adjust the value. The

values depend on the CPU installed.

DO NOT remove the thermal module. The thermal conditions should be monitored.

This manual is related to the following products: