Asus Z87-A - Manual (Page 89)

Chapter 2: BIOS information 2-39
Post Delay Time [3 sec]
This item allows you to select a desired additional POST waiting time to easily enter the BIOS
Setup. You can only execute the POST delay time during normal boot. The values range from
0 to 10 seconds.
This feature will only work when set under normal boot.
The following items appear only when you set the Boot Logo Display to [Disabled].
Post Report [5 sec]
This item allows you to select a desired POST report waiting time
Configuration options: [1 sec] � [1� sec] [Until Press �SC]
2.8.12 Bootup NumLock State [On]
[On] Set the power-on state of the NumLock to [On].
[Off] Set the power-on state of the NumLock to [Off].
2.8.13 Wait For ‘F1’ If Error [Enabled]
[Disabled] Disables the function.
[Enabled] The system waits for the key to be pressed when error occurs.
2.8.14 Option ROM Messages [Force BIOS]
[Force BIOS] The third-party ROM messages will be displayed during the boot sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
2.8.15 Interrupt 19 Capture [Disabled]
Allows you to trap Interrupt 19 by the option ROMs.
Configuration options: [Disabled] [�nabled]
2.8.16 Setup Mode [EZ Mode]
[Advanced Mode] Allows you to go to Advanced Mode of the BIOS after POST.
[EZ Mode]
Allows you to go to EZ Mode of the BIOS after POST.
2.8.17 CSM (Compatibility Support Module)
Allows you to configure the CS� (Compatibility Support �odule) items to fully support the
various VGA, bootable devices and add-on devices for better compatibility.