Asus Z87-A - Manual (Page 55)

Chapter 2: BIOS information 2-5
2. The BIOS Updater screen appears as below.
Updating the BIOS file
To update the BIOS file using BIOS Updater
1.
At the FreeDOS prompt, type bupdater /pc /g and press .
D:\>bupdater /pc /g
4. Select Yes and press . When BIOS update is done, press to exit BIOS
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
• For BIOS Updater version 1.30 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
• Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit BIOS menu.
• �nsure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
�. Press to switch between screen fields and use the keys
to select the BIOS file and press <�nter>. BIOS Updater checks the selected BIOS file
and prompts you to confirm BIOS update.
Are you sure to update BIOS?
Yes No
ASUSTek BIOS Updater for DOS V1.30 [2013/02/22]
Current ROM Update ROM
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
Z87A.CAP 2097152 2013-02-22 17:30:48
PATH:
BOARD:
VER:
DATE:
FLASH TYPE: MX1C 25L1065A
BOARD:
VER:
DATE:
A:\
Z87-A
0204
01/01/2013
UNKNOWN
UNKNOWN
UNKNOWN