Asus M4N98TD EVO - Manual (Page 70)

3-14 Chapter 3: BIOS setup
Chapter 3
ADDR/CMD drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
MEMCLK drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
Data drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DQS drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
Processor ODT [Auto]
Configuration options: [Auto] [240 ohms +/- 20%] [120 ohms +/- 20%] [60 ohms +/- 20%]
Some of the following items are adjusted by typing the desired values using the numeric
keypad and press the key. You can also use the <+> and <-> keys to adjust the
value. To restore the default setting, type [auto] using the keyboard and press the
key.
3.5.8 Processor Voltage [Auto]
Allows you to adjust the CPU VCore voltage with a 0.0125V interval.
3.5.9 CPU/NB Voltage [Auto]
Allows you to adjust the CPU/NB voltage with a 0.0125V interval.
3.5.10 CPU VDDA Voltage [Auto]
This item appears only when you set the Ai Overclock Tuner item to [Manual] or [D.O.C.P],
and allows you to set the CPU VDDA voltage. The values range from 2.50V to 2.80V with a
0.10V interval.
3.5.11 DRAM Voltage [Auto]
This item appears only when you set the Ai Overclock Tuner item to [Manual] or [D.O.C.P],
and allows you to set the DRAM voltage. The values range from 1.80V to 2.50V with a 0.02V
interval.
3.5.12 HT Voltage [Auto]
This item appears only when you set the Ai Overclock Tuner item to [Manual] or [D.O.C.P],
and allows you to set the HyperTransport voltage. The values range from 1.20V to 1.50V with
a 0.02V interval.
3.5.13 NB Voltage [Auto]
This item appears only when you set the Ai Overclock Tuner item to [Manual] or [D.O.C.P],
and allows you to set the NorthBridge voltage. The values range from 1.10V to 1.40V with a
0.02V interval.