4 main menu, 1 primary ide master/slave; sata 1–4, Main menu -8 3.4.1 – Asus M4N98TD EVO User Manual
Page 64: Primary ide master/slave; sata 1–4 -8, Chapter 3 3.4 main menu

3-8
Chapter 3: BIOS setup
Chapter 3
3.4
Main menu
When you enter the BIOS Setup program, the Main menu screen appears, giving you an
overview of the basic system information. Select an item and press
submenu.
Refer to 3.3.1 BIOS menu screen for information on the menu screen items and how to
navigate through them.
3.4.1
Primary IDE Master/Slave; SATA 1–4
While entering Setup, the BIOS automatically detects the presence of IDE/SATA devices.
There is a separate submenu for each IDE/SATA device. Select a device item and press
The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size,
LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART monitoring). These
values are not user-configurable. These items show Not Detected if no device is installed in
the system.
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Main
Ai Tweaker Advanced Power Boot Tools Exit
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
←→
Select Screen
↑↓
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
System Time
[13:51:25]
System Date
[Fri 01/29/2010]
Language
[English]
Primary IDE Master
[Not Detected]
Primary IDE Slave
[Not Detected]
SATA1
[HDT722516DLA380]
SATA2
[Not Detected]
SATA3
[ATAPI DVD DH1]
SATA4
[Not Detected]
Storage Configuration
System Information
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Main
Select the type
of device connected
to the system.
←→
Select Screen
↑↓
Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
SATA 1
Device : Hard Disk
Vendor : HDT722516DLA380
Size : 164.7GB
LBA Mode : Supported
Block Mode : 16Sectors
PIO Mode : 4
Async DMA : MultiWord DMA-2
Ultra DMA : Ultra DMA-6
SMART Monitoring:Supported
LBA/Large Mode
[Auto]
Block(Multi-sector Transfer)M [Auto]
PIO Mode
[Auto]
DMA Mode
[Auto]
SMART Monitoring
[Auto]
32Bit Data Transfer
[Enabled]