Asus M4N98TD EVO - Manual (Page 103)

ASUS M4N98TD EVO 4-13
Chapter 4
4.4.3 Setting the RAID item in BIOS
You must enable the RAID function in the BIOS Setup before creating RAID set(s) using
SATA HDDs. To do this:
1.
Enter the BIOS Setup during POST.
2. Go to the Main menu > Storage Configuration, and then press .
3. Set the SATA Mode select item to [RAID Mode].
4. Save your changes, and then exit the BIOS Setup.
Refer to Chapter 3 for details on entering and navigating through the BIOS Setup.
When set any of SATA ports to RAID mode, all SATA ports run at RAID mode together.
4.4.4 NVIDIA ® MediaShield BIOS RAID configurations
To enter the NVIDIA ® MediaShield BIOS RAID utility
1. Boot up your computer.
2.
During POST, press to display the main menu of the utility.
[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [↑↓] Select [ENTER] Popup
MediaShield BIOS Aug 18 2008
- Define a New Array -
RAID Mode: Mirrored Striping Block: Optimal
Free Disks Array Disks
Port Disk Model Capacity Port Disk Model Capacity
0.0. ST3160812AS 149.04GB
0.2. ST3160812AS 149.04GB [→] Add
0.1. ST3160812AS 149.04GB
0.3. ST3160812AS 149.04GB
[←] Del
The navigation keys at the bottom of the screen allow you to move through the menus
and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and may not
exactly match the items on your screen.