Asus PRL-DLS - Manual (Page 60)

2-32 Chapter 2: Hardware information
POST Code < 4Fh >
1. Power management initialization.
2. Verify password.
POST Code < 50h >
1. Write all of CMOS back to RAM.
POST Code < 52h >
1. Do whatever needs to do before PCI ROM initialization.
2. Shadow adaptor card's ROM.
3. Do whatever need to do after PCI ROM initialization.
4. Build BBS Table.
5. Set segement f000 to shadow write.
6. Save SCSI card information.
7. Set segement f000 to shadow read.
8. Enable parity and NMI.
9. Enable IRQ 12 if PS2 mouse hot plug.
10. Enable BIOS Setup.
POST Code < 60h >
1. Set up PS2.
POST Code < 61h >
1. Enable L1/L2 cache according to BIOS setup option.
2. Chipset final initialization.
3. Chipset power management final initialization.
4. Show system configuration.
POST Code < 62h >
1. Force NUM-LOCK on 101-key keyboard.
2. Clear LEd first.
3. Set NumLock status according BIOS setup.
4. Set Typematic rate according BIOS setup.