Asus PRL-DLS - Manual (Page 115)

ASUS motherboard user guide 5-11
You may also update the LAN drivers from the LAN Driver Disk if you
created one.
Follow these steps to update from the LAN driver disk.
1. Boot Windows 2000 system and log on as Administrator.
2. Click on the Start button. Select Settings , then Control Panel .
3. Double-click the System icon in the Control Panel. Select the
Hardware tab to display the following screen.
4. Click on Device Manager , then on Other Devices .
5. Highlight Ethernet Controller , then click the right mouse button and
select Properties .
6. Select the Driver tab and click on Update Drivers .
7. Click Next . Select Display a list of the known drivers for this device ...
8. Select Network adapters under Hardware Type, and click Next .
9. Click Have Disk… , then insert the LAN driver disk.
10. Follow the succeeding instructions to complete the installation.
5.2.3 ATI ® Rage XL Display Driver Installation
Windows 2000 system can automatically recognize the ATI RAGE XL PCI
driver during system installation. You do not need to load any driver for
supporting the onboard ATI RAGE XL graphics controller chipset.
5.2.4 Enabling ATA100 Feature in Windows ® 2000
To enable the ATA100 feature under Windows 2000, you need to upgrade
to Windows 2000 Service Pack 2.