Asus PRL-DLS - Manual (Page 111)

ASUS motherboard user guide 5-7
B. New System Installation
1. When the Installing Windows NT Networking screen appears, press
Next .
2. Check the Wired to the Network box, then click Next .
3. On the screen that appears, click the button Select from list... to
dispaly the list of LAN devices.
4. Insert the LAN driver disk that you created, then click Have Disk...
5. Type A:\ in the dialog box that appears, then click OK.
6. Select the Intel Adapter , then click OK. Follow the succeeding screen
instructions.
7. When done, the following screen appears showing the Intel Adapter in
the list.
8. Click Select from list... , then click Have Disk...
9. Type A:\ in the dialog box, then click OK.
10. In the following screen, select Intel Adapter , then click OK. Follow the
succeeding screen instructions to complete the installation.
C. Existing System Installation
1. Double-click the Network icon in the Control Panel.
2. Select the Adapter tab, then click Add . A list of adapters appears.
4. Do not select an adapter from the list. Instead, insert the LAN driver
disk that you created from the support CD.
5. Follow steps 4 to 12 in the section “B. New System Installation” to
install the required LAN drivers.
5.1.3 ATI ® Rage XL Display Driver Installation
1. Insert the ASUS support CD into your CD-ROM drive.
2. If Autorun in enabled in your computer, the following screen appears.
Click on
ATI Rage XL Display Driver to install the driver.
If Autorun is disabled, install the display driver from the following path:
\Drivers\Display\Nt40\Setup.exe
3. Follow the screen instructions to complete the installation.