Asus MEW-B - Manual (Page 22)

22 ASUS MEW-B User’s Manual
3. HARDWARE SETUP
8) CPU External Frequency Setting (DSW)
This option tells the clock generator what frequency to send to the CPU, DRAM,
and the PCI bus. This allows the selection of the CPU’s External frequency. The
CPU External Frequency multiplied by the Frequency Multiple equals the CPU’s
Internal frequency (the advertised CPU speed). NOTE: You may set the memory
speed independently from the CPU External Frequency. Depending on your
memory type PC66 (66MHz) or PC100 (100MHz), select the appropriate
“SDRAM” speed along with the appropriate “CPU” speed.
IMPORTANT: Only 66MHz CPU and 100MHz SDRAM should be used on
this motherboard with current 66MHz Socket 370 processors. Other settings are
for experienced users only. When JumperFree mode is enabled, use BIOS setup
in place of these switches (see CPU Speed in 4.4 Advanced Menu). Only se-
lected switches are illustrated, see the next page for a complete frequency listing.
NOTE: In JumperFree mode, all dip switches (DSW) must be set to OFF.
0 1
®
MEW-B
MEW-B CPU External Clock
Frequency Selection
DSW
CPU
SDRAM
→
→
75MHz
112MHz
83MHz
124MHz
66MHz
100MHz
ON 12345 ON 12345 ON 12345
CPU
SDRAM
→
→
100MHz
100MHz 112MHz
112MHz
100MHz
150MHz
ON 12345 ON 12345 ON 12345
CPU
SDRAM
→
→
133MHz
133MHz 150MHz
150MHz 124MHz
124MHz
ON 12345 ON 12345 ON 12345
(JumperFree Mode)
NOTE: Frequency Multiple settings are not available here because usually
Socket 370 processors have locked Frequency Multiples. If your Socket 370
processor does not have a locked Frequency Multiple, you must use CPU
Core:Bus Freq. Multiple in 4.4 Advanced Menu of the BIOS setup to set the
Frequency Multiple. If the Frequency Multiple is locked, setting the Frequency
Multiple in BIOS setup will have no effect.
WARNING! CPU frequencies above 66MHz exceed the specifications for cur-
rent Celeron processors and are not guaranteed to be stable. Premature wearing of
the processor may result when overclocking. Be sure that the DIMM you use can
handle the specified SDRAM MHz or else bootup will not be possible.
Motherboard Settings
3. H/W SETUP