Asus MEW-B - Manual (Page 19)

ASUS MEW-B User’s Manual 19
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
3) Onboard Audio Setting (AUDIO)
(only with onboard PCI audio)
The onboard 32-bit PCI audio may be enabled or disabled using this jumper.
Disable the onboard audio if you are using an ISA or PCI audio card on any of
the expansion slots or a primary AMR on the AMR slot (see 3.7.4 Audio Modem
Riser (AMR) Slot). If using an ISA or PCI audio expansion card, Onboard
AC’97 Audio Controller in 4.4.2 I/O Device Configuration must also be dis-
abled.
Setting
AUDIO
Enable [1-2] (default)
Disable [2-3]
0 1
®
MEW-B
MEW-B Onboard Audio Setting
Disable Enable
(Default)
1 2 3 1 2 3
AUDIO
4) Onboard Audio Codec Setting (CODEC)
The onboard audio CODEC may be enabled or disabled using all of these jump-
ers. Disable the onboard audio CODEC if you are using an ISA or PCI audio
card on any of the expansion slots or a primary AMR on the AMR slot (see AMR
Slot later in this section). If using an ISA or PCI audio expansion card, On-
board AC’97 Audio Controller in 4.4.2 I/O Device Configuration must also
be disabled.
Setting
CODEC
Enable [1-2] [1-2] [1-2] [1-2]
Disable [2-3] [2-3] [2-3] [2-3]
0 1
®
MEW-B
MEW-B Audio Codec Setting
SPK
ADN#
AUD_EN1
AUD_EN2
SPK
ADN#
AUD_EN1
AUD_EN2
Disable Enable
(Default)
CODEC
1 2 3 1 2 3