Asus P/I-P65UP8/CP6ND - Manual (Page 13)

ASUS P/I-P65UP8 User’s Manual 13
III. INSTALLATION
III. INST
ALLA
TION
(Jumpers)
Jumper Settings
1. i960 Bridge Setting
The secondary PCI slots can function as standard PCI slots when the i960 is set
to “Bridge” mode. When the i960 is set to “I2O” mode, the secondary PCI slots
are controlled by the i960 and only intelligent I/O (I2O) cards can be used on the
secondary PCI slots. Additional memory is required for the “I2O” mode.
960SEL Setting
I20 [1-2]
Bridge [2-3]
R
i960 Setting
3
2
1
I20 Bridge
960SEL
3
2
1
960SEL
Caution! The jumper numbering is reversed
2. i960 Local DRAM RAS Setting
When the i960 is set to I20, the i960 chip acts as a processor and at least one
SIMM memory module is required. When using a single memory module, this
jumper does not need setting. When using two memory modules, this jumper
needs to be set according to the number of sides used by the chips mounted on
the memory modules.
DRAMRAS Setting
Single Sided DRAM [1-2]
Double Sided DRAM [2-3]
R
DRAM RAS Setting
1
2
3
Single Sided
DRAMS Double Sided
DRAMS
DRAMRAS
1
2
3
DRAMRAS