Asus K8N-E Deluxe - Manual (Page 93)

ASUS K8N-E Deluxe motherboard 4-29
4.5.6 Hardware Monitor
Hardware Monitor
MB Temperature [35ºC/95ºF]
CPU Temperature [48ºC/118ºF]
CPU Fan Speed [3260RPM]
Chassis Fan Speed [N/A]
Power Fan Speed [N/A]
VCORE Voltage [ 1.520V]
3.3V Voltage [ 3.280V]
5V Voltage [ 5.086V]
12V Voltage [11.742V]
Smart Q-Fan Control [Disabled]
CPU Temperature
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state
whatever was the system state before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
MB Temperature [xxx ºC/xxx ºF]
CPU Temperature [xxx ºC/xxx ºF]
The onboard hardware monitor automatically detects and displays the
CPU and motherboard temperatures. Select Disabled if you do not wish to
display the detected temperatures.
CPU Fan Speed [xxxxRPM] or [N/A]
Chassis Fan Speed [xxxxRPM] or [N/A]
Power Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the
CPU, chassis, and power fan speeds in rotations per minute (RPM). If any
of the fans is not connected to the motherboard, the specific field shows
N/A.
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.