Asus Maximus II Gene - Manual (Page 84)

3-10 Chapter 3: BIOS setup
3.3.1 Tuning Mode [Extreme OC]
The Tuning Mode item is the Extreme Tweaker menu item switch for different
purpose. The Extreme OC mode offers the maximum tuning degree of freedom
to the extreme. The Gaming mode provides the major tuning settings for system
performance boost. Configuration options: [Extreme OC] [Gaming]
3.3.2 CPU Level Up [Auto]
Allows you to select a CPU level, and the related parameters will be automatically
adjusted according to the selected CPU level. If you want to manually configure the
settings in detail, set Ai Overclock Tuner to [Manual] after selecting a CPU level.
Configuration options: [Auto] [E6400] [E6550] [E6600] [E6700] [�6800] [E6850]
[Crazy]
3.3.3 Ai Overclock Tuner [Auto]
Allows selection of CPU/memory overclocking options to achieve desired CPU/
memory internal frequency. Select any of the preset overclocking configuration options:
Manual Allows you to individually set overclocking parameters.
Auto Loads the standard settings for the system.
CPU Level Up Allows you to select a CPU level, and the related parameters
will be adjusted automatically.
3.3.4 CPU Ratio Setting [Auto]
Allows you to adjust the ratio between CPU Core Clock and FSB Frequency.
Use the <+> and <-> keys to adjust the value. The valid value ranges differently The valid value ranges differently
according to your CPU model.
3.3.� CPU Configuration
The items in this menu show the CPU-related information that the BIOS
automatically detects. Refer to section 3.5.1 for details.
3.3.6 FSB Frequency [266]
Displays the frequency sent by the clock generator to the system bus and PCI bus.
The value of this item is auto-detected by the BIOS. Use the <+> and <-> keys to
adjust the FSB frequency. You can also type in the desired frequency using the
numeric keypad. The values range from 200 to 800. This item appears only when
you set CPU Ratio Settings to [Manual].
3.3.7 CPU Clock Skew [Auto]
Adjusting this item may help enhancing BCLK overclocking ability. You may need
to adjust the NB Clock Skew item at the same time.
Configuration options: [Auto] [Normal] [Delay 100ps]–[Delay 1500ps]