Asus Maximus II Gene - Manual (Page 26)

Onboard LEDs
The motherboard comes with LEDs that indicate the voltage conditions of CPU,
memory, northbridge, and southbridge. You may adjust the voltages in BIOS. There
are also an LED for hard disk drive activity and an onboard switch for power status. For
more information about voltage adjustment, refer to 3.3 Extreme Tweaker menu.
1. CPU LED
The CPU LED has two voltage displays: CPU Voltage, and CPU PLL Voltage;
you can select the voltage to display in BIOS. Refer to the illustration below
for the location of the CPU LED and the table below for LED definition.
Normal (green) High (yellow) Crazy (red)
CPU Voltage 0.85000–1.5000 1.50625–1.69375 1.70000–2.40000
CPU PLL Voltage 1.51325–1.63250 1.64575–1.83125 1.84450–3.01050
2-2 Chapter 2: Hardware information