�.3 onboard device configuration, Onboard device [standard, High definition audio [enabled – Asus Maximus II Gene User Manual
Page 100: J-micron esata/pata controller [enabled, Onboard pciex1 lan [enabled

3-26
Chapter 3: BIOS setup
3.�.3
Onboard Device Configuration
Onboard Device [Standard]
Allows you to disable all the onboard device controllers except the LAN controller.
Configuration options: [Standard] [Disabled]
High Definition Audio [Enabled]
[Enabled]
Enables the High Definition Audio Controller.
[Disabled]
Disables the controller.
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy
AC’97 or high-definition audio depending on the audio standard that the front
panel audio module supports.
[AC97]
Set the front panel audio connector (AAFP) mode to legacy
AC’97
[HD Audio]
Set the front panel audio connector (AAFP) mode to high-
definition audio.
J-Micron eSATA/PATA Controller [Enabled]
[Enabled]
Enables the J-Micron eSATA/PATA controller.
[Disabled]
Disables the controller.
Controller Mode [IDE]
Allows you to set the controller mode.
Configuration options: [IDE] [AHCI]
Onboard PCIEx1 LAN [Enabled]
Allows you to enable or disable the onboard PCIEx1 LAN controller.
Configuration options: [Enabled] [Disabled]
Onboard LAN BootROM [Disabled]
This item appears only when you enable the previous item.
[Enabled]
Enables the onboard LAN Boot ROM.
[Disabled]
Disables the onboard LAN Boot ROM.
BIOS SETUP UTILITY
Advanced
Onboard Device Configuration
Onboard Device
[Standard]
High Definition Audio
[Enabled]
Front Panel Type
[HD Audio]
J-Micron eSATA/PATA Controller [Enabled]
Controller Mode
[IDE]
Onboard PCIEx1 LAN
[Enabled]
LAN Boot ROM
[Disabled]
Onboard VIA 1394
[Enabled]
Get your best
overclocking record!
“Onboard Device” is
to disable all the
unnecessary devices
when you want to
reach you best
overclocking record.
But it will keep 1
lan port alive to
submit your score.