Creating a raid set – Asus Maximus II Gene User Manual

Page 157

ROG Maximus II GENE

4-35

Creating a RAID set

To create a RAID set

1. From the utility main menu, select 1. Create RAID Volume and press

. The following screen appears.

2. Enter a name for the RAID set and press .
3. When the RAID Level item is selected, press the up/down arrow key to

select a RAID level to create, and then press .

4. When the Disks item is selected, press to select the hard disk drives

you want to include in the RAID set. The SELECT DISKS screen appears.

5. Use the up/down arrow key to select a drive, and then press

to select. A small triangle marks the selected drive. Press after

completing your selection

Intel(R) Matrix Storage Manager option ROM v8.0.0.1038 ICH10R wRAID5

[

CREATE VOLUME MENU

]

[

HELP

]

Enter a unique volume name that has no special characters and is

16 characters or less.

[↑↓]Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select

Name:

Volume0

RAID Level: RAID0(Stripe)

Disks: Select Disks

Strip Size: 128KB

Capacity: 0.0 GB

Create Volume

[ SELECT DISKS ]

Port Drive Model Serial # Size Status

0 ST3160812AS 9LS0HJA4 149.0GB Non-RAID Disk

1 ST3160812AS 9LS0F4HL 149.0GB Non-RAID Disk

2 ST3160812AS 3LS0JYL8 149.0GB Non-RAID Disk

3 ST3160812AS 9LS0BJ5H 149.0GB Non-RAID Disk

Select 2 to 6 disks to use in creating the volume.

[↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done