Asus Maximus II Gene - Manual (Page 103)

ROG Maximus II GENE 3-29
3.5.6 LCD Poster and LED Control
LCD Poster Backlight [Turn Off]
Allows you to turn on/off the LCD Poster backlight when the system is working.
LCD Poster Backlight (S5) [Turn Off]
Allows you to turn on/off the LCD Poster backlight when the system is in soft-off
state.
LCD Poster Mode [Current Time]
Allows the LCD Poster to display either hardware information or time.
Configuration options: [Current Time] [HWM Information]
The following item becomes configurable when you set LCD Poster Mode to
[HWM Information].
HWM Select Mode
Allows you to select which hardware information to display on the LCD
Poster. Configuration options: [All Voltage] [All Temperature] [All Fan Speed]
All LED Control [Enabled]
Allows you to enable or disable the onboard LEDs control.
Configuration options: [Enabled] [Disabled]
The following items appear only when you set All LED Control to [Enabled].
Voltiminder LED [Enabled]
Allows you to enable or disable the onboard Voltiminder LED.
Configuration options: [Enabled] [Disabled]
CPU LED Selection [CPU]
Allows you to switch the onboard CPU LED display between CPU voltage [CPU],
CPU PLL voltage [CPU PLL] and QPI/DRAM Core voltage [QPI/DRAM Core].
Configuration options: [CPU] [CPU PLL]
BIOS SETUP UTILITY
Advanced
LCD Poster and LED Control
LCD Poster Backlight [Turn Off]
LCD Poster Backlight(S5) [Turn Off]
LCD Poster Mode [Current Time]
All LED Control [Enabled]
Voltiminder LED [Enabled]
CPU LED Selection [CPU]
NB LED Selection [NB]
SB LED Selection [ICH]
Turn On/Turn Off LCD
Poster when system
is working