beautypg.com

3 onboard devices configuration, Onboard devices configuration -10 – Asus P5Q-VM DO User Manual

Page 40

background image

2-10

ASUS P5Q-VM DO/SI

ME Subsystem Configuration

ASF Support [Enabled]

Allows you to enable or disable the Alert Standard Format (ASF).

Configuration options: [Disabled] [Enabled].

ME HECI Configuration

ME-HECI [Enabled]

When set to [Enabled], Host Embedded Communication Interface (HECI) provides

an interface for the exchange of message between the host software and the ME

firmware. Configuration options: [Disabled] [Enabled].

ME-IDER [Disabled]

Allows you to enable or disable the IDE Redirection interface by which the remote

management console is able to direct the client PC to boot. Configuration options:

[Disabled] [Enabled].

ME-KT [Disabled]

When set to [Enabled], the KT function helps redirect keyboard and POST message

to the remote management console and thus facilitates the control of the client

machine through the network. Configuration options: [Disabled] [Enabled].

Configure Intel AMT Parameters

ME BIOS Extension [Enabled]

Allows you to enable or disable ME BIOS Extension.

Configuration options: [Enabled] [Disabled].

The Intel

®

Active Management Technology requires the Intel

®

AMT-enabled software. Also,

the platform must be connected to a power source and an active LAN port.

VE-VECI [Disabled]

Allows you to enable or disable the Virtualization Embedded Controller Interface

(VECI). Configuration options: [Disabled] [Enabled]

Unhide All Physical HC [Enabled]

Allows you to choose hide or not hide all physical Host Controllers.

Configuration options: [Disabled] [Enabled]

VE Subsystem Configuration

POST Delay (in Seconds) [None]

Allows you to set the time delay during POST. Configuration options: [None] [1

Second] [2 Second] (3 Second)

2.5.3

Onboard Devices Configuration

High Definition Audio [Enabled]

Enables or disables the Azalia/AC’97 CODEC. Configuration options: [Enabled] [Disabled]

Front Panel Type [HD Audio]

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or

high-definition audio depending on the audio standard that the front panel audio

module supports. Configuration options: [AC97] [HD Audio]