beautypg.com

2 memory configurations, Memory configurations -4 – Asus P5Q-VM DO User Manual

Page 13

background image

1.4.2

Memory configurations

You may install a 512MB, 1GB, 2GB, and 4GB unbuffered non-ECC DDR2 DIMM into the

DIMM socket.

P5Q-VM DO Motherboard Qualified Vendors List (QVL)
DDR2-800MHz capability

• You may install varying memory sizes in Channel A and Channel B. The system maps

the total size of the lower-sized channel for the dual-channel configuration. Any excess

memory from the higher-sized channel is then mapped for single-channel operation.

• For dual-channel configuration, you can:
-

install two identical DIMMs in DIMM_A1 and DIMM_B1; or

-

install four identical DIMMs in all four slots; or

-

install one identical DIMM pair in DIMM_A1 and DIMM_B1 (yellow slots) and

another identical DIMM pair in DIMM_A2 and DIMM_B2 (black slots).

• Due to the memory address limitation on the 32-bit Windows

®

OS, when you install

4GB or more memory on the motherboard, the actual usable memory for the OS can be

about 3GB or less. For effective use of memory, we recommend that you do either of the

following:

-

Install a maximum of 3GB system memory if you are using a 32-bit Windows

®

OS.

-

Use a 64-bit Windows

®

OS if you want to install 4GB or more memory on the

motherboard.

• This motherboard does not support DIMMs made up of 256 megabits (Mb) chips or less.

• This motherboard supports up to 16GB on Windows

indows

®

XP Professional x64 and

Windows

®

Vista x64 editions. You may install a maximum of 4GB DIMMs on each slot.

. You may install a maximum of 4GB DIMMs on each slot.

• The default memory operation frequency is dependent on its Serial Presence Detect

(SPD), which is the standard way of accessing information from a memory module.

Under the default state, some memory modules for overclocking may operate at a lower

frequency than the vendor-marked value.

• For system stability, use a more efficient cooling system to support a full memory load (4

DIMMs) or overclocking conditions.

continued on the next page

Vendor

Part No.

Size

SS/

DS

Chip

Brand

Chip No.

Timing

DIMM

(BIOS)

Voltage

DIMM Support

A* B* C*

A-Data

AD2800E001G0U

2048MB(Kit of 2) SS N/A

Heat-Sink Package

4-4-4-12 2.0~2.1V •

A-Data

M2GVD6G314170Q1E58

1024MB

DS VDATA VD29608A8A-25EG80813

A-Data

AD2800002GMU

2048MB

DS Hynix

Heat-Sink Package

A-Data

AD2800E002GOU

4096MB(Kit of 2) DS N/A

Heat-Sink Package

4-4-4-12 1.9~2.1V •

Apacer

78.91G91.9K5

512MB

SS Apacer

AM4B5708JQJS8E0751C

5

Apacer

78.01GA0.9L5

1024MB

SS Apacer

AM4B5808FEWS8E0909C

5

Corsair

CM2X1024-6400

1024MB

DS Corsair Heat-Sink Package

Corsair

XMS2-6400

1024MB

DS Corsair Heat-Sink Package

4

Chapter 1: Product introduction

1-4