Updating the bios file – Asus Z87-C User Manual
Page 51

Chapter 2: BIOS information
2-5
2.
The BIOS Updater screen appears as below.
Updating the BIOS file
To update the BIOS file using BIOS Updater
1.
At the FreeDOS prompt, type bupdater /pc /g and press
D:\>bupdater /pc /g
4.
Select Yes and press
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
•
For BIOS Updater version 1.30 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
•
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit BIOS menu.
•
Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
3.
Press
to select the BIOS file and press
and prompts you to confirm BIOS update.
Are you sure to update BIOS?
Yes
No
ASUSTek BIOS Updater for DOS V1.30 [2013/02/22]
Current ROM
Update ROM
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
Z87C.CAP 2097152 2013-02-22 17:30:48
PATH:
BOARD:
VER:
DATE:
FLASH TYPE:
MX1C 25L1065A
BOARD:
VER:
DATE:
A:\
Z87-C
0204
01/01/2013
UNKNOWN
UNKNOWN
UNKNOWN