Asus P5Q-E/WiFi-AP - Manual (Page 97)

ASUS P5Q-E Series 3-27
3.5.4 Onboard Device Configuration
Onboard Device Configuration
High Definition Audio [Enabled]
Front Panel Type [HD Audio]
Marvell IDE [Enabled]
Marvell IDE Boot ROM [Enabled]
Marvell LAN1 [Enabled]
LAN Boot ROM [Disabled]
Marvell LAN2 [Enabled]
LAN Boot ROM [Disabled]
Onboard Wireless LAN [Enabled]
LSI Firewire 1394 [Enabled]
Serial Port1 Address [3F8/IRQ4]
Enable or Disable
High Definition Audio
Controller
High Definition Audio [Enabled]
Allows you to enable or disable the High Definition Audio Controller.
Configuration options: [Enabled] [Disabled]
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy
AC’97 or high-definition audio depending on the audio standard that the front
panel audio module supports. Configuration options: [AC97] [HD Audio]
Marvell IDE [Enabled]
Allows you to enable or disable the onboard Marvell IDE controller.
Configuration options: [Enabled] [Disabled]
Marvell IDE Boot ROM [Enabled]
This item appears only when you set the previous item to [Enabled].
Configuration options: [Disabled] [Enabled]
MarvelI LAN1/2 [Enabled]
Allows you to enable or disable the onboard Marvell LAN port1/2.
Configuration options: [Enabled] [Disabled]
LAN Boot ROM [Disabled]
This item appears only when you enable the previous item.
Configuration options: [Disabled] [Enabled]
Onboard Wireless LAN [Enabled]
Allows you to enable or disable the onboard wireless LAN controller.
Configuration options: [Enabled] [Disabled]
Agere Firewire 1394 [Enabled]
Configuration options: [Enabled] [Disabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
BIOS SETUP UTILITY
Advanced