Asus P5Q-E/WiFi-AP User Manual
Page 58
2-32
Chapter 2: Hardware information
6. USB connectors (10-1 pin USB 78, USB 910, USB1112_WFG)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
If your chassis supports front panel USB ports, you can attach a front panel
USB cable to these connectors. Connect the USB cable to ASUS Q-Connector
(USB, blue) first, and then install the Q-Connector (USB) to the USB connector
onboard.
The USB1112 connector is available for USB 2.0 ports only in non-WiFi Edition.