Asus P5Q-E/WiFi-AP - Manual (Page 180)

4-64 Chapter 4: Software support
6. Use the up/down arrow key to select the stripe size for the RAID 0 array, and
then press . The available stripe size values range from 4 KB to 128
KB. The default stripe size is 128 KB.
We recommend a lower stripe size for server systems, and a higher stripe size
for multimedia computer systems used mainly for audio and video editing.
7. Enter the RAID volume capacity that you want and press . The default
value indicates the maximum capacity allowed.
8. Press when the Create Volume item is highlighted. The following
warning message appears.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
9. Press to create the RAID volume and return to the main menu, or to
go back to the Create Volume menu.