Asus P5Q-E/WiFi-AP User Manual
Page 162
4-46
Chapter 4: Software support
Using Drive Xpert function in Express Gate environment
You may use Drive Xpert function in Express Gate environment by preparing only
two hard disks.
For Express Gate environment, you need to use another computer to install
Express Gate on a USB flash disk drive in advance.
Follow below instructions to complete the installation:
1. Plug a USB flash disk drive in a computer with OS already installed.
2. Refer to the Express Gate installation
Refer to the Express Gate installation
on page 4-50. Ensure to select
select USB as
the target disk volume when the
hen the Choose
target volume screen appears.
3. Plug the USB flash disk drive to the
motherboard. Restart the system, and
launch the Express Gate.
Launching Drive Xpert
To open the ASUS Utility panel, click
. Launch Drive Xpert from the ASUS
Utility panel. The main screen as shown below appears. Select EZ Backup or
Super Speed according to your need.
Before using the Drive Xpert function, ensure that you have back up all your
data in your hard disks.
• EZ Backup erases all original data in the hard disk connected to the
SATA_E2 (white, port 1) connector on the motherboard.
• Super Speed erases all original data in both hard disks.