Asus Crosshair V Formula/ThunderBolt - Manual (Page 98)

3-14 Chapter 3: BIOS setup
To change an administrator password:
1. Select the Administrator.Password item and press .
2. From the Enter.Current.Password box, key in the current password, then
press .
3. From the Create.New.Password box, key in a new password, then press
.
4. Confirm the password when prompted.
To clear the administrator password, follow the same steps as in changing an
administrator password, but press when prompted to create/confirm the
password. After you clear the password, the Administrator.Password item on top
of the screen shows Not.Installed.
User.Password
If you have set a user password, you must enter the user password for accessing
the system. The User.Password item on top of the screen shows the default Not.
Installed. After you set a password, this item shows Installed.
To set a user password:
1. Select the User.Password item and press .
2. From the Create.New.Password box, key in a password, then press
.
3. Confirm the password when prompted.
To change a user password:
1. Select the User.Password item and press .
2. From the Enter.Current.Password box, key in the current password, then
press .
3. From the Create.New.Password box, key in a new password, then press
.
4. Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password,
but press when prompted to create/confirm the password. After you clear
the password, the User.Password item on top of the screen shows Not.Installed.