Asus Crosshair V Formula/ThunderBolt User Manual
Page 118

3-34
Chapter 3: BIOS setup
Bootup.NumLock.State.[On]
[On]
Sets the power-on state of the NumLock to [On].
[Off]
Sets the power-on state of the NumLock to [Off].
Full.Screen.Logo.[Enabled]
[Enabled]
Enables the full screen logo display feature.
[Disabled]
Disables the full screen logo display feature.
Set this item to [Enabled] to use the ASUS MyLogo 3™ feature.
Option.ROM.Messages.[Force.BIOS]
[Force BIOS] The third-party ROM messages will be forced to display during the
boot sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-
party manufacturer had set the add-on device to do so.
Interrupt.19.Capture.[Disabled]
[Enabled]: Allows option ROMs to trap Int 19.
[Disabled]: Stops option ROMs to trap Int 19.
Setup.Mode.[Advanced.Mode]
[Advanced Mode] Sets Advanced Mode as the default screen for entering the
BIOS setup program.
[EZ Mode]
Sets EZ Mode as the default screen for entering the BIOS setup
program.
Wait.for.‘F1’.If.Error.[Enabled]
When set to [Enabled], the system waits for the
occurs.
Boot.Option.Priorities
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system.
• To select the boot device during system startup, press
Logo appears.
• To access Windows OS in Safe Mode, do any of the following:
- Press
Boot.Override
These items displays the available devices. The number of device items that
appears on the screen depends on the number of devices installed in the system.
Click an item to start booting from the selected device.