Asus Crosshair V Formula/ThunderBolt - Manual (Page 175)

ROG Crosshair V Formula 4-41
Creating.a.RAID.volume
To create a RAID volume:
1. In the Main Menu, press <2> to enter the LD View / LD Define Menu
function.
2. Press + , and the following screen appears.
3. Move to the RAID.Mode item and press to select a RAID mode to
create.
4. Move to the Assignment item by using the down arrow key and set Y to
select the hard disk drives you want to include in the RAID set.
5. Press + to save the setting.
6. The utility prompts the following message. Press + to input the LD
The utility prompts the following message. Press + to input the LD Press + to input the LD
name.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[↑] Up [↓] Down [PaUp/PaDn] Switch page [Space] Change Option
[Ctrl-Y] Save [ESC] Exit
[ Keys Available ]
[ LD Define Menu ]
[ Drives Assignments ]
Port:ID Drive Model Capabilities Capacity(GB) Assignment
01:00 xxxxxxxxx xxxxxxx xxxxxx Y
02:00 xxxxxxxxx xxxxxxx xxxxxx Y
03:00 xxxxxxxxx xxxxxxx xxxxxx N
04:00 xxxxxxxxx xxxxxxx xxxxxx N
LD No LD Name RAID Mode Drv
LD 1 Logical Drive 1 RAID 0 2
Strip Block 64 KB Fast Init ON
Gigabyte Boundary ON Cache Mode WriteThru
Please press Ctrl-Y key to input the LD Name
or press any key to exit.
If you do not input any LD name, the default LD
name will be used.
7. Eenter an LD name, and then press any key to continue. enter an LD name, and then press any key to continue.
Enter the LD name here:
Fast Initialization Option has been selected
It will erase the MBR data of the disks.
8. Press + to erase the MBR, or you may press any key to abort the Press + to erase the MBR, or you may press any key to abort the
settings.
9. Press + to enter the screen to modify the array capacity, or press
any key to use the maximum capacity.