Asus Crosshair V Formula/ThunderBolt User Manual
Page 109
ROG Crosshair V Formula
3-25
ErP.Ready.[Disabled]
[Disabled]
Disables the Energy Using Products (EuP) Ready function.
[Enabled]
Allows BIOS to switch off some power at S5 state to get system
ready for the EuP requirement. When set to [Enabled], power for
WOL, WO_USB, audio and onboard LEDs will be switched off at
S5 state.
Restore.AC.Power.Loss.[Power.Off]
[Power On]
The system goes into on state after an AC power loss.
[Power Off]
The system goes into off state after an AC power loss.
[Last State]
The system goes into either off or on state, whatever the system
state was before the AC power loss.
Power.On.By.PS/2.Device.[Disabled]
[Disabled]
Disables the Power On by a PS/2 device.
[Enabled]
Enables the Power On by a PS/2 device. This feature requires an
ATX power supply that provides at least 1A on the +5VSB lead.
Power.On.By.PME.[Disabled]
[Disabled]
Disables the PME devices to generate a wake event.
[Enabled]
Enables the PME devices to generate a wake event.
Power.On.By.RTC.[Disabled]
[Disabled]
Disables RTC to generate a wake event.
[Enabled]
When set to [Enabled], the items RTC Alarm Date (Days) and
Hour/Minute/Second will become user-configurable with set values.
3.5.7.
APM